Phaetus Conch Hotend for QIDI Q2 / Q2C 0.4mm Nozzle
$46.95
Phaetus Conch Hotend for QIDI Q2 / Q2C 0.4mm Nozzle
$46.95
Pickup available at Gold Coast, Queensland. (Check Pickup Hours)
Usually ready in 2 hours
Order before 3pm for same-day dispatch via Australia Post. 2-5 business days to most of Australia. Shipping rates and policy
Free shipping on orders over $120 (excluding 3D printers)
The Phaetus Conch Hotend is a drop-in replacement hotend for the QIDI Q2 and Q2C. It combines a quick-swap M4 EndCoat Gen2 nozzle with a titanium alloy heatbreak and an enlarged heatsink, giving you a maximum flow rate of 33mm³/s and printing temperatures up to 370°C. The EndCoat coating stands up to carbon fibre, glass fibre and other abrasive filaments far longer than hardened steel, and the nozzle can be changed in under 30 seconds.
Key Features
- Flow rate up to 33mm³/s for smooth, high-speed printing
- Quick-swap M4 EndCoat Gen2 nozzle with up to 3× longer coating durability
- 370°C maximum temperature for engineering-grade materials
- Nozzle changes in under 30 seconds, with an anti-twist design that protects the heatbreak
- Doubled heatsink surface area for faster heat dissipation and fewer clogs
- Seamless heatbreak with a polished inner bore (Ra 0.2μm or better) for low-friction filament flow
Specifications
- Compatibility: QIDI Q2, QIDI Q2C
- Nozzle Diameter: 0.4mm
- Nozzle Type: M4 EndCoat Gen2, quick-swap
- Max Flow Rate: 33mm³/s
- Max Temperature: 370°C
- Filament Diameter: 1.75mm
- Heatbreak: Titanium alloy, rated for 10 million load cycles
- Supported Materials: PLA, PETG, ABS, TPU, plus abrasive composites (carbon fibre, glass fibre, wood and metal filled) and high-temperature engineering filaments
In the Box
- 1 x Conch Hotend with 0.4mm EndCoat nozzle
- 1 x H5 open-end spanner
- 1 x Allen key
- 1 x Thermal paste
Ideal For
- Replacing a worn or clogged hotend on a QIDI Q2 or Q2C
- Printing carbon fibre, glass fibre and other abrasive filaments without rapid nozzle wear
- High-temperature engineering materials up to 370°C
- Fast nozzle size changes without replacing the whole hotend
Always tighten the nozzle hot when fitting or replacing it. A nozzle tightened cold can loosen as the metal expands and leak during printing.
6973090166373
