Bambu Lab PLA Basic 1kg with Spool | Australian Stock

Bambu Lab PLA Basic on a reusable Bambu Lab spool, ready to load straight into your printer or AMS. Designed for high-speed printing, PLA Basic achieves speeds up to 258mm/s with stronger layer adhesion and better impact resistance than standard PLA. Each 1kg spool comes vacuum-sealed with desiccant for moisture protection.

Key Features

Comes on a reusable spool, no separate spool needed
High-speed printing up to 258mm/s with excellent layer adhesion
RFID-enabled for automatic AMS recognition: load and print with zero manual setup
Keep the spool and switch to PLA Basic Refills next time to save money and plastic
Smooth surface finish with minimal warping and stringing
Over 30 vibrant colours available to suit any project

Specifications

Material: PLA (Polylactic Acid)
Filament Diameter: 1.75mm ±0.03mm
Net Weight: 1kg (filament only)
Recommended Nozzle Temperature: 190 to 220°C
Recommended Bed Temperature: 35 to 55°C
Max Volumetric Speed: 21mm³/s (0.4mm nozzle)
Drying Conditions: 55°C for 8 hours
Storage: Below 20% RH, sealed with desiccant

What's in the Box

PLA Basic Filament 1kg on a Bambu Lab reusable spool ×1
Desiccant Pack ×1

Ideal For

New Bambu Lab owners who need their first spools
High-speed printing on Bambu Lab X1, P1, A1, H2 and X2 series printers
Multi-colour projects using the AMS system
Anyone who wants to print without printing or buying a separate spool

Compatibility

Compatible with all FDM 3D printers using 1.75mm filament. Optimised for Bambu Lab printers with full RFID and AMS support on X1 Series, P1 Series, A1 Series, H2 Series, X2 Series, and all AMS variants (AMS, AMS Lite, AMS 2 Pro, AMS HT).

PLA Basic is biodegradable under industrial composting conditions and derived from renewable plant-based resources. For best results, dry before use if the filament has absorbed moisture, and store in an airtight container with desiccant between prints.