BIQU PyroGrip Build Plate for Bambu Lab H2D & H2S
$45.95
BIQU PyroGrip Build Plate for Bambu Lab H2D & H2S
$45.95
Pickup available at Gold Coast, Queensland. (Check Pickup Hours)
Usually ready in 2 hours
Order before 3pm for same-day dispatch via Australia Post. 2-5 business days to most of Australia. Shipping rates and policy
Free shipping on orders over $120 (excluding 3D printers)
PyroGrip is BIQU's heat-activated build plate for the Bambu Lab H2D and H2S. The surface grip strength increases as the bed heats up, then releases the print once it cools down. No glue stick needed for most filaments, and the textured finish gives your first layer a clean, matte look.
Key Features
- Heat-activated adhesion: grips harder when hot, releases when cold, so warping is less of an issue
- No glue required for most filaments including PLA, PETG, ABS and TPU
- Textured surface finish for a consistent, professional first layer
- Marked left and right nozzle zones for dual nozzle printers
- Grid lines etched into the surface for quick part alignment
Specifications
- Product name: PyroGrip Build Plate
- Usable print size: 350mm x 325mm
- Plate dimensions: 350mm x 325mm (13.78in x 12.80in)
Filament Printing Guide
- ABS: 90-100°C bed temp, no glue, upper glass cover stays on
- PETG: 60-80°C bed temp, no glue, upper glass cover stays on
- TPU: 35-45°C bed temp, no glue, remove upper glass cover
- ASA: 90-100°C bed temp, no glue, upper glass cover stays on
- PVA: 45-60°C bed temp, no glue, remove upper glass cover
- PLA / PLA-CF / PLA-GF: 45-60°C bed temp, no glue, remove upper glass cover
- PC / PC-CF: 90-110°C bed temp, glue stick required, upper glass cover stays on
- PA / PA-CF / PAHT-CF: 90-110°C bed temp, glue stick required, upper glass cover stays on
Compatibility
Made for Bambu Lab H2D and H2S printers.
Package Contents
1x BIQU PyroGrip Build Plate
3010200073
