Bambu Lab PLA Basic 1.75mm Filament 1kg Refill
Bright Green
$24.00
Bambu Lab PLA Basic 1.75mm Filament 1kg Refill
$24.00
Pickup available at Gold Coast, Queensland. (Check Pickup Hours)
Usually ready in 2 hours
Order before 3pm for same-day dispatch via Australia Post. 2-5 business days to most of Australia. Shipping rates and policy
Free shipping on orders over $120 (excluding 3D printers)
Bambu Lab PLA Basic Refill is an eco-friendly, spool-free filament option that reduces plastic waste while delivering the same exceptional print quality you expect from Bambu Lab. Designed for high-speed printing, PLA Basic achieves speeds up to 258mm/s with stronger layer adhesion and enhanced impact resistance compared to standard PLA filaments. The refill format requires a reusable spool (sold separately or 3D printable from Bambu Lab's included spool files) and comes vacuum-sealed with desiccant to ensure optimal moisture protection.
Key Features
- High-speed printing up to 258mm/s with excellent layer adhesion
- RFID-enabled for automatic AMS recognition — load and print with zero manual setup
- Eco-friendly refill format reduces plastic waste
- Smooth surface finish with minimal warping and stringing
- Over 30 vibrant colours available to suit any project
Specifications
- Material: PLA (Polylactic Acid)
- Filament Diameter: 1.75mm ±0.03mm
- Net Weight: 1kg
- Recommended Nozzle Temperature: 190–220°C
- Recommended Bed Temperature: 35–55°C
- Max Volumetric Speed: 21mm³/s (0.4mm nozzle)
- Drying Conditions: 55°C for 8 hours
- Storage: Below 20% RH, sealed with desiccant
What's in the Box
- PLA Basic Filament Refill ×1
- Desiccant Pack ×1
- Instructions ×1
- Spool Sticker ×1
Note: This is a refill product — a reusable spool is required. Download and print the official Bambu Lab spool from your printer's built-in files or from MakerWorld.
Ideal For
- Beginners seeking reliable, easy-to-print filament
- High-speed printing on Bambu Lab X1, P1, A1, and H2 series printers
- Multi-colour projects using the AMS system
- Eco-conscious makers looking to reduce plastic spool waste
Compatibility
Compatible with all FDM 3D printers using 1.75mm filament. Optimised for Bambu Lab printers with full RFID and AMS support on X1 Series, P1 Series, A1 Series, H2 Series, and all AMS variants (AMS, AMS Lite, AMS 2 Pro, AMS HT).
PLA Basic is biodegradable under industrial composting conditions and derived from renewable plant-based resources. For best results, dry before use if the filament has absorbed moisture, and store in an airtight container with desiccant between prints.
FLMT-A00-G3-SPLFREE
