{"product_id":"fep-film-for-anycubic-photon-mono-m7-max-5-pcs","title":"Release Film for Anycubic Photon Mono M7 Max (390 × 263 mm) – FEP, PFA (nFEP) or ACF","description":"\u003cp\u003ePre-cut release film for the \u003cstrong\u003eAnycubic Photon Mono M7 Max\u003c\/strong\u003e, cut to \u003cstrong\u003e390 × 263 mm\u003c\/strong\u003e so it drops straight into the vat frame with no measuring, no cutting and no wasted roll. Sheets are cut from fresh factory rolls, packed flat with protective liners, and shipped from our Gold Coast store.\u003c\/p\u003e\u003cp\u003eChoose your film type from the \u003cstrong\u003eFilm type\u003c\/strong\u003e option above — FEP, PFA (nFEP) or ACF. Not sure which to pick? See the comparison below and in the product images.\u003c\/p\u003e\u003cp\u003eChanging your film is a ten-minute job — follow our \u003ca href=\"https:\/\/www.3docity.com.au\/pages\/how-to-change-the-fep-film-on-your-resin-3d-printer\"\u003eInstallation Guide\u003c\/a\u003e.\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eWhich film should I choose?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFEP (5 pack)\u003c\/strong\u003e — the proven everyday film. Standard fluoropolymer release film. Clear, affordable and forgiving. Five sheets per pack so you always have spares on the shelf.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFA nFEP (2 pack)\u003c\/strong\u003e — lower peel force, longer life. nFEP is a PFA-based film with a lower surface tension than FEP, so models release with less peel force. Gentler on fine supports, quieter, and it lasts noticeably longer between changes. Two sheets per pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eACF (2 pack)\u003c\/strong\u003e — the fast-print film. ACF is the frosted, textured release film that ships on many current printers such as the Saturn 4 Ultra and Photon Mono M7 series. Its micro-texture breaks the vacuum between the model and the film, allowing much faster lift speeds and a low peel force on large flat layers. Two sheets per pack.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eFEP\u003c\/th\u003e\n\u003cth\u003ePFA (nFEP)\u003c\/th\u003e\n\u003cth\u003eACF\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheets per pack\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThickness\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003ctd\u003e0.15 mm\u003c\/td\u003e\n\u003ctd\u003e0.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight transmission\u003c\/td\u003e\n\u003ctd\u003e≥ 95%\u003c\/td\u003e\n\u003ctd\u003e≥ 95%\u003c\/td\u003e\n\u003ctd\u003eHigh (frosted finish)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel release\u003c\/td\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService life\u003c\/td\u003e\n\u003ctd\u003eStandard (typically 20–30 prints)\u003c\/td\u003e\n\u003ctd\u003eLong (typically 2–3× FEP)\u003c\/td\u003e\n\u003ctd\u003eLong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003ctd\u003eFrosted \/ textured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut to fit:\u003c\/strong\u003e exact vat-frame size for the listed printers, no trimming needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability:\u003c\/strong\u003e resists resin, UV and repeated peel cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent light transmission:\u003c\/strong\u003e even curing across the whole build plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy model release:\u003c\/strong\u003e low surface energy so prints lift cleanly off the film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked flat:\u003c\/strong\u003e protective liners both sides, no creases or scratches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote for the Photon Mono M7 Max:\u003c\/strong\u003e this printer ships from the factory with a film that has pre-punched mounting holes. Our sheets are supplied cut to size without holes — trim and punch the mounting holes using your old film as a template before fitting.\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 390 × 263 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Anycubic Photon Mono M7 Max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilm types:\u003c\/strong\u003e FEP (5 pack) · PFA nFEP (2 pack) · ACF (2 pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e FEP and PFA (nFEP) 0.15 mm; ACF 0.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight transmittance:\u003c\/strong\u003e ≥ 95% (FEP \/ PFA (nFEP))\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature resistance:\u003c\/strong\u003e FEP 205 °C continuous \/ 260 °C peak\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e NovaFEP release film, stocked and cut by 3docity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCompatibility is based on the vat-frame film size. If your printer isn't listed but uses the same size, it will fit — ask us if unsure.\u003c\/em\u003e\u003c\/p\u003e","brand":"NovaFEP","offers":[{"title":"FEP (5 pack)","offer_id":62827324276895,"sku":"fep-film-anycubic-m7-max-390-263","price":88.0,"currency_code":"AUD","in_stock":true},{"title":"PFA nFEP (2 pack)","offer_id":62869390098591,"sku":"pfa-film-anycubic-m7-max-390-263","price":78.0,"currency_code":"AUD","in_stock":true},{"title":"ACF (2 pack)","offer_id":62869390131359,"sku":"acf-film-m7max-390-263","price":80.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0632\/5039\/9391\/files\/novafep-m7max.png?v=1783850000","url":"https:\/\/www.3docity.com.au\/products\/fep-film-for-anycubic-photon-mono-m7-max-5-pcs","provider":"3docity","version":"1.0","type":"link"}