The benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000. Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.
Easy to use
The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.
Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.
1 x V6 heatsink 1.75mm or 2.85mm
1 x V6 heatbreak 1.75mm or 2.85mm
1 x V6 brass 0.4mm nozzle 1.75mm or 2.85mm
1 x V6 duct
1 x V6 aluminium heater block
1 x Heater cartridge 12V or 24V
1 x Thermistor cartridge
1 x Thermistor extension cable
1 x 30 x 30 x 10 fan 12V or 24V
1 x Thermal compound
1 x V6 fixings kit
1 x V6 silicone sock
1 x PTFE tubing 100mm or 800mm
3Docity is an authorised and trusted reseller for e3d Online
All items listed are in stock in AUSTRALIA south east Queensland and will be shipped same day when ordered before 3pm AEST Australia post.
View our refunds and returns policy.